Поклонникам Экзистов посвящается
Информация из неофициальных источников.
"information from other commentary videos and official blogs.
First, the body material is air metal (magnesium alloy) .
Zion which was advertised as if it exceeds magnesium is also "resin" resin as it is, so it is said that even if it costed it was returned to metal.
Personally I believe that the metal body is the best, as I have been disappointed by the absence of body rigidity at 07 Rubyas who had three kitchens at once (laughs)
There is also tournament airiness> 04 cellate> 10 Seruteto> 13 Seruteto> 16 I have to have used the Seruteto, this point is very preferable ^^
then, 16 Seruteto HD (3500 and 4000 number) had been adopted in the monocoque body is adopted in all count has been It was.
In addition to being able to accommodate further deck gears that are just the size of the body by this, the rigidity increases with less distortion, and it is appreciated to upgrade the waterproof performance.
Also, as it becomes a new type stopper switch , it seems that the waterproof performance is dramatically increasing, so it is predicted that the waterproofness is considerably higher than the conventional model.
Although the name has changed to the machine cut tough Digi gear (super duel duralumin) , since it thinks that the material was ultra duralumin until now, it seems that ingenuity to improve gear meshing is done.
The rotor seems to be a new type of Zion rotor similar to 16 cell tate, and the shape of the bale is that the line is easy to drop in the line roller. About the
mug shield, it is the same as 16 cell tate at the body and the line roller, both ends of the drive shaft .
Also, in the FC (Finesse Custom) model, it seems that the mug shield is trying to reduce weight with only the body.
By the way, in the FC model, for the purpose of thorough weight reduction, it seems that metal parts in the handle arm are aluminized against stainless steel in normal models.
Next is about spooling .
The spool has become a "new shape" of aluminum which was considerably thinned .
That is, it is incompatible with the reels so farLooks like a new spare spool will be released in March from SLPW.
It is regrettable to abandon the convenience that the former RCS spool was able to use while holding a metal washer, but it is said that there are parts that you have to truncate to make big progress.
As a feature, LC-ABS (Long Cast - Anti - Backlash System) became, the average flight distance is improved by 5%, Drag knob is getting bigger so that it is easy to pinch.
The line stopper was also improved, it became a new type perfect line stopper , and it is said that it is caught fine from fine thread to thick thread.
Regarding the spool, the biggest change point is thought to be "review of spool diameter" .
This model change seems to make catchphrase "LT concept" which makes both weight reduction and durability compatible , but now it has come to use PE line for most fishing, large diameter spool like the conventional one There is also a need to stick to the fact that it is going to fix at this timing.
Along with that, the reel's image of the count has changed considerably from that of the past so I will write in detail.
To make it easy to understand, I created a table with counts and spool diameters corresponding.
Taking 2500 as an example, the old model is 48 mm in diameter, whereas in LT it is different from 45 mm.
The same diameter as the former 2500 is LT 3000, and the LT 4000 is one that fills the gap between the old 2500 and 3000 (2750?).
(By the way, the stroke seems to be almost the same as before, but it seems that the LT 2500 is slightly shorter than the old 2500.)
Also, since the one with C in the model number is a compact body, Convert it to the old model (?). (FC model except)
LT-2500
body 2500, the spool former 2250 (winding amount is the same as 2508), the gear ratio of 5.2 (winding length 73cm)
LT-2500-XH
body 2500, the spool former 2250 (winding amount is 2508 the same), the gear ratio 6.2 (winding length 87cm)
LT-3000S-C
body 2500, the spool former 2508, the gear ratio of 5.2 (winding length 77cm)
LT-3000S-CXH
body 2500, the spool former 2508, gear ratio 6.2 (winding length 93cm)
LT-3000-CH
body 2500, the spool former 2510, gear ratio 5.7 (winding length 85cm)
LT-3000-XH
body 3000, the spool former 2510, gear ratio 6.2 [conventional R custom the corresponding (winding length 93cm)
LT-4000-C
body 3000, the spool former 2750 (winding amount is the same as 3012), the gear ratio of 5.2 (winding length 82cm)
LT-4000-CXH
Body 3000, old spool old 2750 (the amount of winding is the same as 3012), gear ratio 6.2 (winding length 99 cm)
Finally, although it is heavy, it has been considerably lighter, but it is even lighter.
It is 205 g for LT - 4000 - C, 185 g for conventional 2508, 150 g for Finesse custom FC - LT 1000 S - P, which is a terrible lightness.
I feel like I'm going to choose a rod that matches lightly this much, but it seems like I'm going to be able to do amazing comfortable fishing when I match 18 exodists to the ultra lightweight rods as well.
Besides, the details such as steering wheels and knobs have changed a lot."
Ниже табличка с диаметрами шпуль.